Chilly 45
The smallest unit in the lineup: a complete unit with compressor, tank and pump in a compact stainless steel housing, built for low coolant temperatures from −10 to +15 °C. Connect it to your loop and plug it in.
- Complete self-contained unit: compressor, 25 L stainless tank and centrifugal pump
- High-efficiency microchannel condenser and copper spiral evaporator
- Digital controller for setpoint and monitoring
Chilly 45 specifications
| Model | Cooling capacity | BTU/h | Tons | Power supply | Tank | Water temp range | Dimensions (L×W×H) |
|---|---|---|---|---|---|---|---|
| Chilly 45 (M-LT) | 4.2 kW* | 14,300 | 1.2 | 230 V or 208 V · 1 ph | 25 L (6.6 gal) | −10 to +15 °C | 765 × 770 × 515 mm · 81 kg |
Options & accessories
- Water or water/glycol operation
- Optional Modbus interface for building management
- ¾" ball valves and 13 mm hose fittings supplied for inlet and outlet
Chilly Max
Four models from 6.4 to 12.7 kW on a compact, mobile chassis, including the inverter-driven 70i for loads that rise and fall. The fan sits on top, so the unit can stand against a wall on any side.
- Microchannel condenser and plate heat exchanger
- 30 L stainless steel tank with level indicator
- Centrifugal pump with built-in bypass
- Casters for easy positioning; side panels lift off for service
Chilly Max specifications
| Model | Cooling capacity | BTU/h | Tons | Power supply | Tank | Water temp range | Dimensions (L×W×H) |
|---|---|---|---|---|---|---|---|
| Chilly Max 50 | 6.4 kW* | 21,800 | 1.8 | 230 V · 1 ph or 3 ph | 30 L (7.9 gal) | −10 to +40 °C | 853 × 715 × 1014 mm · 145 kg† |
| Chilly Max 70iInverter | 8.0 kW* | 27,300 | 2.3 | 208 V · 1 ph · 60 Hz | 30 L (7.9 gal) | −10 to +40 °C | 720 × 940 × 1022 mm · weight per configuration |
| Chilly Max 90 | 10.7 kW* | 36,500 | 3.0 | 230 V · 1 or 3 ph; 208 V · 1 ph | 30 L (7.9 gal) | −10 to +40 °C | 853 × 715 × 1014 mm · 145 kg† |
| Chilly Max 110 | 12.7 kW* | 43,300 | 3.6 | 230 V · 1 ph or 3 ph | 30 L (7.9 gal) | −10 to +40 °C | 853 × 715 × 1014 mm · 145 kg† |
Options & accessories
- Tank overflow prevention kit (¾", 24 V) for loops with elevated piping or tanks
- Voltage versions: 230 V single-phase (W), 230 V three-phase (S) or 208 V single-phase (2/PE). Choose the version that matches your site's power supply.
- Modbus interface for building management
MCK Series
Fixed-speed and inverter (i) models from 13 to 79 kW, in several voltage versions. The cooling circuit sits above a large insulated stainless tank, warm air discharges straight up, and side panels lift off for service. Larger units and dual-circuit versions are built to order. Meets the EU Ecodesign Directive on energy efficiency.
- Fully hermetic scroll compressor and stainless plate heat exchanger
- Insulated stainless steel tank (120–300 L)
- Stainless steel cabinet with a 10 m power cable fitted
MCK Series specifications
| Model | Cooling capacity | BTU/h | Tons | Power supply | Tank | Water temp range | Dimensions (L×W×H) |
|---|---|---|---|---|---|---|---|
| MCK 140iInverter | 13.0 kW*** | 44,400 | 3.7 | 208 V · 1 ph · 60 Hz | 120 L (32 gal) | −10 to +40 °C | 715 × 715 × 1603 mm · weight per configuration |
| MCK 141 | 15.0 kW* | 51,200 | 4.3 | 380–415 V or 440–480 V · 3 ph | 120 L (32 gal) | −10 to +40 °C | 715 × 715 × 1575 mm · 210 kg |
| MCK 181 | 19.2 kW* | 65,500 | 5.5 | 380–415 V or 440–480 V · 3 ph | 300 L (79 gal) | −10 to +40 °C | 1000 × 1000 × 2055 mm · 310 kg |
| MCK 181iInverter | 21.0 kW*** | 71,700 | 6.0 | 440–480 V · 3 ph · 60 Hz | 300 L (79 gal) | −10 to +40 °C | 1000 × 1000 × 2055 mm · weight per configuration |
| MCK 221 | 25.9 kW* | 88,400 | 7.4 | 380–415 V or 440–480 V · 3 ph | 300 L (79 gal) | −10 to +40 °C | 1000 × 1000 × 2055 mm · 330 kg |
| MCK 271 | 29.4 kW* | 100,300 | 8.4 | 380–415 V or 440–480 V · 3 ph | 300 L (79 gal) | −10 to +40 °C | 1000 × 1000 × 2055 mm · 340 kg |
| MCK 321 | 38.6 kW* | 131,700 | 11.0 | 380–415 V or 440–480 V · 3 ph | 300 L (79 gal) | −10 to +40 °C | 1000 × 1000 × 2055 mm · 350 kg |
| MCK 320iInverter | 38.0 kW*** | 129,700 | 10.8 | 440–480 V · 3 ph · 60 Hz | 300 L (79 gal) | −10 to +40 °C | 1500 × 1000 × 2055 mm · weight per configuration |
| MCK 641 | 79 kW** | 269,500 | 22.5 | 380–415 V or 440–480 V · 3 ph | 300 L (79 gal) | −10 to +40 °C | 1000 × 1000 × 2055 mm · 380 kg |
Options & accessories
- Tank overflow prevention kit (24 V), sized to the model: 1" on MCK 141–181, 1¼" on MCK 221–321, larger on bigger units
- Modbus interface for building management
- Compressor soft starter and stepless fan speed control
- Wheels standard on MCK 141, optional on larger sizes
- MCK 642: dual-circuit version of the MCK 641, with one compressor in each circuit for redundancy (built to order)
Which family fits?
| Chilly 45 | Chilly Max | MCK Series | |
|---|---|---|---|
| Capacity | ~4.2 kW | 6.4 – 12.7 kW | 13 – 79 kW |
| Models | 1 | 4 (50 · 70i · 90 · 110) | 9 listed; more built to order |
| Inverter (i) models | – | 70i | 140i · 181i · 320i; other models on request |
| Tank | 25 L stainless | 30 L stainless | 120 – 300 L stainless |
| Mobility | Compact, portable | Casters standard | Wheels on 141; optional above |
| Heat rejection | Front fan | Top discharge | Top discharge |
| Installation | Indoor | Indoor | Indoor |
| Best for | Benches, single servers | Small clusters, edge | Multi-rack rooms |
Data sheets and manuals, matched to your unit.
We share data sheets and installation manuals once we have sized the right unit with you. That way you get documents for the exact model, voltage and configuration you will install, not a catalog to guess from.
Start with your numbers →Built to your application.
The standard range covers most compute loads, but Quantor's engineers can customise a unit around your application and demand. Tell us what you are cooling and we will work out the configuration with you.
Steady load or changing load? Pick the drive.
Chilly Max and MCK sizes come as fixed-speed units, and selected sizes also come as i models with an inverter compressor. If your equipment runs at full load most of the time, the fixed-speed unit is the simpler choice. If the load rises and falls through the day, the i model follows it. Other sizes can be built as i models; a data sheet and quote take about two weeks.
Inverter compressor
Compressor speed follows the heat load, holding supply temperature steady with fewer on/off cycles and lower energy use at part load.
Variable-speed pump
Available on request for Chilly Max and MCK. It holds constant pressure as flow changes, from one cold plate to eight, up to 7 bar (100 psi).
Variable-speed fan
Condenser fan speed adjusts to conditions for quieter, more efficient heat rejection.
Modbus to your BMS
Modbus communication with your building management system (BMS): optional on all units.
- Heat loads that swing widely, such as training runs, test cycles or racks that come and go
- Loops with a high pressure drop through dense manifolds and cold plates
- Sites where part-load energy use matters, or where a building system needs to monitor the chiller